CWNP CWDP-305 Übungsprüfungen
Zuletzt aktualisiert am 24.04.2025- Prüfungscode: CWDP-305
- Prüfungsname: Certified Wireless Design Professional
- Zertifizierungsanbieter: CWNP
- Zuletzt aktualisiert am: 24.04.2025
When designing for a PTP outdoor link, what important consideration should be made about local vegetation? (Choose all that apply.)
- A . Leaves
- B . Tree height growth
- C . Water density
- D . Reflection factor
What basic RF math formula should be used as a baseline to convert an RF value in units of dBm into a value of mW? Note: “dBm” in the formulas represents the known dBm value
- A . 0 dBm = 3 mW
- B . 0 dBm = 1 mW
- C . 0 dBm = 2 mW
- D . 0 dBm = 4 mW
Which of the following items could be considered constraints when performing a network design? (Choose all that apply.)
- A . Timeline
- B . Personnel
- C . Politics
- D . Budget
What should always be done before connecting an AP to the production network?
- A . Baseline configuration that prevents the introduction of security issues to the network on initial connection.
- B . Disabling SSID broadcasting.
- C . Reduction of output power.
- D . Increase in output power.
What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?
- A . Mandatory data rates
- B . Channel bonding
- C . MCS data rates
- D . Maximal Ratio Combining
How much more power can a 1 Mbps 802.11b signal have than a 54 Mbps 802.11g signal if it is sent through a saturated amplifier?
- A . 5 dBm
- B . 2 dBm
- C . 2 dB
- D . 5 dB
Which definition correctly describes the "local MAC" variation of the centralized WLAN architecture?
- A . All MAC functions are performed by the AP. A minimal subset of network control is offloaded to the WLAN controller along with management and monitoring functions.
- B . PHY functions are performed directly by the AP. MAC functions are divided almost equally between the WLAN controller and the AP, according to the time sensitivity of the feature or service.
- C . The AP provides the RF termination point for the WLAN, but performs very few of the WLAN functions or services. The WLAN controller performs all MAC functions and the AP is very simple and lightweight.
- D . All RF-, data-, and control-related WLAN functions are performed by the AP. APs coordinate network services with one another and are managed by a WNMS,
Using a SCA means that all APs will be using the same channel in a given layer.
How is the AP with which the client associates determined?
- A . All APs share a virtual Multicast Address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- B . All APs share a virtual BSSID. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- C . All APs share a virtual IP address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- D . The client selects the AP based on a known set of MAC to BSSID mappings stored in the clients authorized SSID listing.
For what types of systems should you request read-only access to in order to perform an analysis of the customer’s existing infrastructure? (Choose all that apply.)
- A . Clients
- B . RADIUS
- C . Switches
- D . Active Directory
- E . Routers
Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?
- A . SoW
- B . BoM
- C . Design report
- D . Project plan