Network Appliance NS0-184 Übungsprüfungen
Zuletzt aktualisiert am 28.04.2025- Prüfungscode: NS0-184
- Prüfungsname: NetApp Certified Storage Installation Engineer, ONTAP
- Zertifizierungsanbieter: Network Appliance
- Zuletzt aktualisiert am: 28.04.2025
While troubleshooting an issue with a newly installed system, you used the system controller environment show command.
In this scenario, which issue would be diagnosed with this command?
- A . controller configuration issues
- B . controller hardware issues
- C . shelf cabling issues
- D . controller version issues
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view telemetry data. The customer also wants to receive online information about any risks with the cluster and potential best-practice gaps.
Which tool satisfies the customer’s requirements?
- A . Active IQ Digital Advisor
- B . Interoperability Matrix Tool
- C . Spot by NetApp
- D . Cloud Manager
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?
- A . A LIF is a port that provides physical connections.
- B . A LIF is created within a broadcast domain and contains a pool of IP address.
- C . A LIF is an IP address or a WWPN that is associated with a port.
- D . A LIF separates network domains to access cluster data.
Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)
- A . Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the daily tasks and provide input and output examples.
- B . If you have a specific issue, you can visit the Knowledge Base Web site (https://kb.netapp,com).
- C . The answers to any of your questions can be found on the NetApp SmartSolve site (http://smartsolve.netapp.com).
- D . You should open a case with NetApp Support for all future questions with low priority and include the keyword "Training" in the title.
You have installed a new stack of SAS disk shelves, powered them on, and set the shelf IDs.
What is the next step to complete the setup of the newly installed SAS shelves?
- A . You are finished and can now boot up the system.
- B . You must finish the switch configurations.
- C . You must power-cycle each disk shelf.
- D . You must let the new SAS stack sit for 8 minutes before plugging it into the controllers.
While testing storage failover, you receive an error message indicating that you have a disk inventory mismatch.
What is a reason for the error message?
- A . unsupported disks
- B . cabling problems
- C . Flash Cache problems
- D . unowned disks
You are going to add a node to an existing cluster but first you must gather the appropriate Information for the new node’s management LIF.
What two pieces of Information is required to accomplish this task? (Choose two.)
- A . IP address
- B . NTP server address
- C . Service Processor Information
- D . default gateway
What is NetApp’s best practice regarding Ethernet flow control?
- A . Leave flow control enabled.
- B . Disable flow control on the switch ports.
- C . Disable flow control on the host, switch, and all node ports.
- D . Disable flow control on all 10Gbps ports.
- E . Disable flow control on cluster network ports in the Data ONTAP cluster.
An administrator has physical ports e0e and e0f connected to 10GbE upstream switches. The e0c and e0d ports are connected to 1GbE upstream switches. All four ports are in the same broadcast domain.
The administrator wants to make sure that LIFs that need 10GbE cannot failover to 1GbE ports, but that LIFs that can use 1GbE or 10GbE can still failover to all four ports.
In this scenario, what should you do to accomplish this task?
- A . Create two separate broadcast domains: one that contains e0e and e0f, and one that contains all four ports.
- B . Create two separate failover groups: one that contains ports e0e and e0f, and one that contains ports e0c and e0d.
- C . Create two separate broadcast domains: one that contains ports e0e and e0f, and one that contains e0c and e0d.
- D . Create two separate failover groups: one that contains ports e0e, and e0f only and one that contains all four ports.
On which type of network interfaces are the cluster interconnect LIFs created?
- A . on an FC or FCoE port
- B . on an interface group
- C . on a UTA port shared with other LIFs
- D . on a physical port